List of modern monitors that support 15 kHz analog RGB signals
Requirements
A list of modern flat panel (LCD, OLED) monitors that directly support analog 15 kHz signals through discrete RGB connectors (VGA, DVI-A, and/or SCART). (Note that Component video is actually YPrPb.)
"Full" 15 kHz RGB Support in the table below means it supports 15kHz signals at least as well as a CRT:
"Partial" support deficiencies should be noted in the comments.
List of Monitors
Make |
Model |
Panel Type |
Size (in. diag.) |
x-Res |
y-Res |
Aspect Ratio (x:y) |
Video Inputs |
15 kHz RGB Support |
Sync on Green |
Comments |
Acer |
A221HQL |
21.5 |
1920 |
1080 |
16:9 |
DVI, VGA |
? |
(specs) |
||
Acer |
AL 707 |
17 |
1280 |
1024 |
4:3 |
VGA |
black screen |
"" |
||
Acer |
G185H |
18.5 |
1366 |
768 |
16:9 |
VGA |
Partial |
"Syncs to NTSC, PAL, and Interlace/Double NTSC. Doesn't display Interlace/Double Pal. Doesn't correct Aspect Ratio, but otherwise looks surprisingly nice. SN: ETLJ70D00102201E568503" |
||
Acer |
G276HL Kbix |
27 |
1920 |
1080 |
16:9 |
DVI, VGA, HDMI |
Full |
(This is the nicest LCD I have ever seen on Amiga. Just use a RGB to VGA adapter and it works VERY well. Highly Recommended Added by R-C-MAN) (NB: Gbd variant does not have HDMI and does not support 15kHz.) |
||
Acer |
G277HL Abid |
27 |
1920 |
1080 |
16:9 |
DVI, VGA, HDMI |
Full |
(Works great on an Atari ST at Low and Medium resolutions (color). Just used a simple RGB to VGA adapter.) |
||
Acer |
G276HL Lbidx |
TN |
27 |
1920 |
1080 |
16:9 |
DVI, VGA, HDMI |
Partial |
"Couldn't find a way to set aspect ratio and couldn't eliminate vertical timing bands completely. Overall not as nice as BenQ 702A" |
|
Acer |
G276HL Lbmidx |
TN |
27 |
1920 |
1080 |
16:9 |
DVI, VGA, HDMI |
Partial |
"Does not honour aspect ratio for 4:3/5:4 sources. Clock and phase timings will not resolve moire on a checkerboard pattern." |
|
Acer |
G206HQL |
TN |
19.5 |
1600 |
900 |
16:9 |
DVI, VGA |
? |
(specs) |
|
Acer |
P215H |
Full |
||||||||
Acer |
H233H |
? |
||||||||
Acer |
H236HL |
IPS |
23 |
1920 |
1080 |
16:9 |
DVI, VGA,HDMI |
? |
NTSC Amiga 500 with WB 1.2 |
|
Acer |
T232HL |
IPS |
23 |
1920 |
1080 |
16:9 |
HDMI, VGA |
Partial |
"works, but pixels are uneven and pretty ugly. Also can't take out of 16:9 mode." (specs) |
|
Acer |
V193HQV |
? |
||||||||
Acer |
V203HV |
? |
||||||||
Acer |
V226HQL Bbd |
TN |
21.5 |
1920 |
1080 |
16:9 |
DVI, VGA |
No |
||
Acer |
V226HQL (UM.WV6AA.B01) |
TN |
21.5 |
1920 |
1080 |
16:9 |
DVI, VGA |
Full |
"Works well on an Amiga A500 with a passive VGA adapter. 2018 USA panels DO NOT support 15khz. (specs) |
|
Asus |
VE225 |
TFT |
21.5 |
1920 |
1080 |
16:9 |
DVI-D, HDMI, VGA |
? |
||
Asus |
VE228H |
TFT |
21.5 |
1920 |
1080 |
16:9 4:3 |
DVI-D VGA |
Full |
Australian model tested. |
|
Asus |
VE247 |
? |
||||||||
Asus |
VE248 |
Full |
A500 with full Overscan, both non-/interlaced works (but i. flickers) |
|||||||
Asus |
VW227D |
TFT |
21.5 |
1920 |
1080 |
16:9 |
VGA |
(specs) |
||
Beetronics |
17VG3 |
LED-IPS |
17 |
1280 |
1024 |
5:4 |
HDMI, VGA, BNC and RCA |
? |
|
|
BenQ |
BL2205PT |
Partial |
Doesn't remember screen position. Uncorrectable aspect ratio. |
|||||||
BenQ |
BL702A |
TN |
17 |
1280 |
1024 |
5:4 |
VGA |
Yes |
||
BenQ |
BL912 |
TN |
19 |
1280 |
1024 |
5:4 |
VGA, DVI-D |
Full |
Yes |
|
BenQ |
FFP222Wa |
Martin Brierley reports that PAL mode isn't supported on this monitor |
||||||||
BenQ |
G2420HD |
|||||||||
BenQ |
GL2222HDL |
TN |
21.5 |
1920 |
1080 |
16:9 |
DVI-D, VGA |
Partial |
Uncorrectable aspect ratio (specs) |
|
BenQ |
G610HDPL |
? |
||||||||
BenQ |
G922HDL |
18.5 |
1366 |
768 |
16:9 |
DVI-D, VGA |
Does not do 15khz |
Uncorrectable aspect ratio, interlaced mode flickers too much. (specs) |
||
Benq |
V2400 Eco |
TN |
24 |
1920 |
1080 |
16:9 |
VGA, HDMI |
Tested with Escom Amiga A1200, works well (specs) |
||
BenQ |
XL2410T |
(specs) |
||||||||
BenQ |
XL2411Z |
? |
(specs) |
|||||||
Cornea |
CT1702T |
TFT |
17 |
1280 |
1024 |
5:4 |
Coax, Composite, DVI-D, S-Video, VGA |
? |
(specs) |
|
Dell |
1707FPt |
? |
17 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
No |
? |
|
Dell |
2001FP |
TFT |
20 |
1600 |
1200 |
4:3 |
Composite, DVI, S-Video, VGA |
Doesn't
remember screen position. Units manufactured until June 2005 work, those
September 2005 and later don't. Interlaced modes flicker badly with RGB but
look great with S-Video. (specs) |
||
Dell |
E1914H |
TN |
19 |
1366 |
768 |
16:9 |
VGA |
Units with a part number of 4FF47 (made in November 2014) do work, but those with part number NJVXM (made in March 2015) don't. The part number can be found between the first and second hyphen in the serial number, without the leading zero. (specs) |
||
Dell |
P2210T |
TN |
22 |
1680 |
1050 |
16:10 |
DVI-D, HDMI, VGA |
[Full] |
Seems to work well in all modes tested in. (specs) |
|
Dell |
P2214H |
TFT |
22 |
1920 |
1080 |
16:9 |
DVI-D, HDMI, VGA |
[Full] |
Seems to work well in all modes tested in. (specs) |
|
Dell |
P2214HB |
TFT |
22 |
1920 |
1080 |
4:3, 5:4, 16:9 |
DVI-D, Display Port, VGA |
[Full] |
Works great on A500 with ACA500plus. Straight up RGB-VGA cable. Shifts between Pal/NTSC quickly and flawlessly. Use in HiRes as I don't have Super Denise. Model number used is P2214hb Rev A06 December 2015 or LATER. ([https://www.newegg.com/dell-p2214hb-22/p/0JC-0004-004E3]) |
|
Dell |
SR2320L |
23 |
1920 |
1080 |
16:9 |
DVI, HDMI, VGA |
Doesn't remember screen position. A few pixels lost in some modes. (specs) |
|||
Dell |
ST2320L |
TN |
23 |
1920 |
1080 |
16:9 |
DVI-D, HDMI, VGA |
(specs) |
||
Dell |
ST2410 |
TFT |
24 |
1920 |
1080 |
16:9 |
DVI-D, HDMI, VGA |
(specs) |
||
Dell |
ST2420L |
TFT |
24 |
1920 |
1080 |
16:9 |
DVI-D, HDMI, VGA |
? |
(specs) |
|
Dell |
U2211Ht |
IPS |
21.5 |
1920 |
1080 |
16:9 |
DisplayPort, DVI-D, VGA |
? |
(specs) Works out of the box, it will not accept some resolutions, great picture |
|
Dell |
U2311H |
IPS |
23 |
1920 |
1080 |
16:9 |
DisplayPort, DVI-D, VGA |
(specs) confirmed working 29/06/18 with RGB-to-VGA adapter from Amigakit. Recommended settings to remove vertical banding (menu, display settings) - H position 20, Pixel Clock 90, Phase 30 (A500) or 60 (A1200). May depend on individual Amiga. |
||
Dell |
U2410 |
IPS |
24 |
1920 |
1200 |
16:10 |
Component, Composite, DisplayPort, DVI-D, HDMI, VGA |
|||
Dell |
U2412MB |
IPS |
24 |
1920 |
1200 |
16:10 |
DisplayPort, DVI, VGA |
Units manufactured in Ireland in July 2014 work (PAL), those manufactured in China in October 2013 don't (NTSC). Unit manufactured China August 2014 (PAL) and sold in Australia works, can be locked to 4:3 "Has some minor anomalies." (specs) |
||
Dell |
U2711 |
IPS |
27 |
2560 |
1440 |
16:9 |
Component, Composite, DisplayPort, DVI-D, HDMI, VGA |
Partial |
(specs) Jitters, dark and blurry through VGA, but it definitely works. |
|
Dell |
U2913WM |
IPS |
29 |
2560 |
1080 |
21:9 |
DisplayPort, DVI-D, HDMI, VGA |
? |
(specs) |
|
Eizo |
FlexScan EV2450 |
IPS |
23.8 |
1920 |
1080 |
16:9 |
DisplayPort, DVI-D, HDMI, VGA |
Partial |
"Signal error" shown, unable to change any settings. Picture is nice, though. |
|
Eizo |
FlexScan S1931 |
19 |
1280 |
1024 |
5:4 |
DVI, VGA |
No Sync (50Hz impossible) |
(specs) |
||
Epson |
EB-X11 |
1024 |
768 |
4:3 |
VGA |
Partial |
Projector (specs) |
|||
Fujitsu |
B22W-5 ECO |
22 |
1680 |
1050 |
16:0 |
DVI, VGA |
no |
black screen |
||
Fujitsu |
B24W-6 |
TN |
24 |
1920 |
1200 |
16:10 |
DisplayPort, DVI, VGA |
Partial |
Image adjust supports Full screen, Keep aspect and 1:1. |
Tested on Atari 520 STE with UBEswitch RGB=>VGA=>VGA. Lo-, mid- and hi-res supported. Scales and keeps aspect ratio, but doesn't fill screen in hi-res. In hi-res the image is centered, but aligned slightly below the top of the screen. |
Fujitsu |
B24T-7 |
TN |
24 |
1920 |
1080 |
16:9 |
HDMI, DVI, VGA |
Partial |
Image adjust supports Full screen and Keep aspect. |
Tested on Atari 520 STE with UBEswitch RGB=>VGA=>VGA. Lo-, mid- and hi-res supported. Scales and keeps aspect ratio, but doesn't fill screen in hi-res. In hi-res the image is centered, but aligned with the top of the screen. |
Fujitsu Siemens |
Scaleoview L19-2 Model L9ZA K1117-V173 |
TN |
19 |
1280 |
1024 |
5:4 |
VGA |
Not working (invalid signal, black screen) |
||
HP |
EM869A |
? |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
No |
? |
|
HP |
L2335 |
TFT |
23 |
1920 |
1200 |
16:10 |
Component, Composite, DVI, S-Video, VGA |
? |
(specs) |
|
Hyundai |
ImageQuest N71S |
TFT |
17 |
1280 |
1024 |
5:4 |
VGA |
? |
(specs) |
|
Insignia |
NS-20EM50A13 |
? |
20 |
1600 |
900 |
16:9 |
DVI-D, VGA |
No |
? |
VGA EDID implies 1024×768 maximum |
LG |
D2542P-PN |
TFT |
25 |
1920 |
1080 |
16:9 |
VGA |
"out of spec 15kHz/50Hz" |
(specs) |
|
LG |
DM2780D |
TFT |
27 |
1920 |
1080 |
16:9 |
VGA |
"15kHz/50Hz Invalid Format" |
(specs) |
|
LG |
L204WS |
TFT |
20 |
1680 |
1050 |
5:4 |
VGA |
Untested but officiall |
Yes |
(specs) |
LG |
L1717S |
TFT |
17 |
1280 |
1024 |
? |
VGA |
Yes |
Works well with my US Atari 520STFM, using the Monitor out to VGA. Displays high resolution monochrome mode. Does not display low and medium resolutions |
|
LG |
M1717A |
TFT |
17 |
1280 |
1024 |
5:4 |
Composite, SCART, S-Video, VGA |
? |
(specs) |
|
LG |
1721a |
TFT |
17 |
1280 |
1024 |
5:4 |
Composite, S-Video, VGA, tuner module |
Full |
(Uses Hsync or Csync on pin 13, or thru composite input) |
|
LG |
1921a |
TFT |
19 |
1280 |
1024 |
5:4 |
Composite, S-Video, VGA, tuner module |
Full |
||
LG |
19LS4R |
TN+Film |
19 |
1440 |
900 |
16:10 |
Component, Composite, DVI, S-Video, SCART, VGA |
? |
(specs) |
|
LG |
22LS4R |
22 |
1680 |
1050 |
16:10 |
Component, Composite, HDMI, S-Video, VGA |
? |
(specs) |
||
LG |
M198WA |
19 |
1440 |
900 |
16:10 |
Component, Composite, DVI, S-Video, SCART, VGA |
Full |
Works with an Amiga 600 SCART RGB at all PAL resolutions. Some flicker in interlaced modes when Intuition is drawing the screen, but no noticable flicker at 640x256p or 1200x256p. Needs to be manually put in 4:3 aspect on first use. (Service Manual), (Operation & User’s Manual) |
||
LG |
M2232D |
? |
21.5 |
1920 |
1080 |
16:9 |
Component, Composite, HDMI, SCART, VGA |
? |
Confirmed Working 13th August 2019 via Composite on A1200 Rev 1D4 @ 640x256 and 640x512 ([https://www.lg.com/uk/support/support-product/lg-M2232D-PZs]) |
|
LG |
M228WA |
TN |
22 |
1680 |
1050 |
16:10 |
Component, Composite, DVI, SCART, S-Video, VGA |
Partial |
(specs) |
|
Medion |
MD 32117 PQ |
TN |
17 |
1280 |
1024 |
5:4 |
VGA |
Not working "Mode not supported" |
||
NEC |
LCD1550M |
TFT |
15 |
1024 |
768 |
4:3 |
VGA |
[NOT Working. Only 31-60 Khz supported - https://www.nec-display-solutions.com/p/download/cp/Products/DesktopLCDs/Products/SupportedProducts/1550M/ProductManuals/PDF-Manual-LCD1550M(english)-CDROM-Version.pdf?fn=LCD1550M-UsersGuide-english-CDROM-Version.pdf[/cell]] |
||
NEC |
LCD195VXM+ |
TN |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
No |
Does not sync. Probably same applies to sister model LCD175VXM+/ |
|
NEC |
LCD1970GX |
TN |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
Partial |
Interlaced modes don't work properly. |
|
NEC |
LCD1970NX |
TFT |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
http://www.necdisplay.com/documents/UserManuals/MSLCD1970V_1970VX_LCD1970NX.pdf |
||
NEC |
LCD1970NXp |
TFT |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
The "p" is for PVA. Interlaced modes don't work properly. (specs) |
||
NEC |
LCD1970VX |
TFT |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
FULL |
http://www.necdisplay.com/p/desktop-monitors/lcd1970vx?type=support |
|
NEC |
LCD1970NXp |
TFT |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA |
FULL |
This one can even handle interlaced modes of Commodore Amiga 500 and 1200 and ATARI Falcon 030. Has vertical stripes with many games (depending on their precise vertical refresh rate, like 49,8Hz or 49,9Hz), which can be compensated by using the 'automatic' setting in a game that actually works fine without stripes (i.e. Xenon II). There is an optional stereo soundbar with 3.5 inch connector available for this monitor, which can be attached to the bottom of the monitor. PAL-HiRes does NOT work right! The image is vertically stretched about twice the display's height!The monitor and soundbar was available in white and blgack/silver color. https://id.nec.com/en_ID/products/display-products/desktop-monitor/business-monitor/nec-multisync-lcd1970nxp.html |
|
NEC |
LCD1990NXP |
TN |
19 |
1280 |
1024 |
4:3 |
DVI-I, VGA |
Full |
Seems to work well in all modes tested in. The model is also available in 21inches (LCD2190NXp) |
|
NEC |
LCD1990SXi |
TN |
19 |
1280 |
1024 |
4:3 |
DVI-I, VGA |
Full |
Seems to work well in all modes tested in. The model is also available in 21inches (LCD2190SXi) |
|
NEC |
E222W |
TN |
22 |
1680 |
1050 |
16:10 |
DVI-D, VGA |
Full |
Seems to work well in all modes tested in. |
|
NEC |
EA190M |
TN |
19 |
1280 |
1024 |
5:4 |
DVI-D, VGA, Audio |
Partial |
Interlaced modes don't sync. Has audio speakers. |
|
NEC |
EA193Mi |
AH-IPS |
19 |
1280 |
1024 |
5:4 |
DisplayPort, DVI, VGA |
Partial |
Uncorrectable aspect ratio. (specs) |
|
NEC |
EA221WMe |
TN |
22 |
1680 |
1050 |
16:10 |
DVI-D, VGA, Audio |
Partial |
Interlaced modes don't sync. Has audio speakers |
|
NEC |
LCD51V |
TFT |
15 |
1024 |
768 |
4:3 |
VGA |
Partial |
||
NEC |
LCD52VM |
TFT |
15 |
1024 |
768 |
4:3 |
VGA |
No Signal |
||
NEC |
Accusync LCD71V |
TFT |
17 |
1280 |
1024 |
5:4 |
VGA |
Fully supported, but 480i flicker is annoying and my copy of the screen (rev. 1G) has faint vertical banding in 15 kHz modes. Narrow viewing angle. |
||
NEC |
Accusync LCD71Vm |
TFT |
17 |
1280 |
1024 |
5:4 |
VGA |
Full |
Fully supported |
|
NEC |
Accusync LCD72VM |
TFT |
17 |
1280 |
1024 |
5:4 |
VGA |
no Signal |
||
Panasonic |
TH-42PWD6UY |
Plasma |
42 |
852 |
480 |
16:9 |
? |
Works perfectly over SCART RGB |
||
Panasonic |
TX-L42D25B |
LCD |
42 |
1920 |
1080 |
16:9 |
? |
Works on A1200 Rev2B with SCART RGB cable, but requires H position adjustment via service menu to center the screen. Will output in all resolutions, best found to be 640x512 interlaced. Could not get it to work with 15kHz VGA. (https://www.manualslib.com/manual/442861/Panasonic-Txl42d25.html?page=107#manual) |
||
Panasonic |
WV-LW2200 |
LCD |
21 |
1920 |
1080 |
16:9 |
HDMI, VGA, BNC (composite video) |
([ftp://ftp.panasonic.com/pub/Panasonic/cctv/SpecSheets/WV-LW2200LW1900_2A-048LF.PDF] specs) |
||
Philips |
Brilliance 272P7V |
LCD |
27 |
3840 |
2160 |
16:9,4:3,1:1 |
HDMI/VGA/DISPLAY PORT/DP MINI |
Full? |
PIP + BIB |
Aspect ratio has to be set manually and is kept across all screen modes and inputs. Picture is very nice, though. Interlace flicker is much less uncomfortable than on other LCD screens. Perhaps the only 4K display with VGA port and 15kHz capability! |
Philips |
Brilliance 240B |
LCD |
24 |
1920 |
1200 |
16:9,4:3,1:1 |
DVI-D/VGA |
24-94KHz only, 480i and above only | partial |
comp sync, csync, SoG, but requires Xsync to RGBHV circuit such as lm1980 to sync at all |
240BW9CB, User Manual |
Philips |
Brilliance 240V |
IPS |
24 |
1920 |
1080 |
16:9 |
HDMI/DVI-D/VGA |
TBD |
240V5QDSB/00, 15kHz VGA tester works, Amiga/Atari not tested yet |
|
Planar |
1520M |
TFT |
15 |
1024 |
768 |
4:3 |
Composite, S-Video, VGA |
Full? |
If you change resolutions, you have to readjust the picture. (specs) |
|
Planar |
PL1700 |
TFT |
17 |
1280 |
1024 |
5:4 |
VGA |
? |
(specs) |
|
Polaroid |
P24RP0108A |
Unknown |
24 |
1366 |
768 |
16:9 |
VGA, Composite, HDMI |
Full |
Although this is a TV it has a VGA input. I have tested it using a PAL Amiga 500 using an AmigaKit VGA adapter. All games run full screen so are a bit stretched. |
|
Samsung |
LN40B540P8F |
? |
40 |
1920 |
1080 |
16:9 |
Component, Composite, HDMI, VGA |
No |
? |
|
Samsung |
nSyncMaster 510N |
TN |
15 |
1024 |
768 |
5:4 |
VGA |
Some users report success. One user with a PAL Amiga 500 reports an NTSC 510N manufactured March 2015 in Malaysia won't sync at 15kHz using an unbuffered adapter. |
||
Samsung |
SyncMaster 710N |
TN |
17 |
1280 |
1024 |
5:4 |
VGA |
Some units reportedly have 740N internals and cannot sync at 15 kHz. (specs) |
||
Samsung |
SyncMaster 741MP |
LCD |
17 |
1280 |
1024 |
4:3 |
VGA,RGB,S-Video,Composite |
Partial |
Amiga 500 does work over SCART RGB with reasonable quality, but with a very slight flicker. Does not support 15Khz VGA |
|
Samsung |
SyncMaster 910MP |
TN |
19 |
1280 |
1024 |
5:4 |
Component, DVI, S-Video, SCART, VGA |
Really blurry with 240p and 480i. Does not support 15kHz over VGA, only SCART. (specs) |
||
Samsung |
SyncMaster 940BE |
TFT |
19 |
1280 |
1024 |
5:4 |
DVI, VGA |
"sometimes difficult to get it to sync without jitter, but you can do it" (specs) |
||
Samsung |
SyncMaster 940MW |
TN |
19 |
1440 |
900 |
16:10 |
DVI-D, VGA |
no |
(specs) |
|
Samsung |
SyncMaster 2032MW |
20 |
1680 |
1050 |
16:10 |
Component, composite, DVI, HDMI, S-Video, VGA |
? |
"It can't support native resolutions with rgb to vga adapter put you can put two amigas with scart and composite output." (specs) |
||
Samsung |
SyncMaster SA350 (S23A350H) |
? |
23 |
1920 |
1080 |
16:9 |
HDMI, VGA |
No |
? |
(specs) |
Samsung |
SyncMaster T200HD |
TFT |
20 |
1680 |
1050 |
16:10 |
DVI, HDMI, VGA |
(specs) |
||
Samsung |
SyncMaster T220HD |
TFT |
22 |
1680 |
1050 |
16:10 |
DVI, HDMI, VGA |
Does not work on my A1200. Only if SCART connector exists |
(specs) |
|
Samsung |
Samsung XL2370 (EF23WS) |
TFT |
23 |
1920 |
1080 |
16:9 |
DVI, HDMI |
not working |
Not working (15kHz/50Hz invalid signal) |
|
Sanyo |
LCD22vt11dvd |
19 |
1366 |
768 |
16:9 |
Component, Composite, HDMI, SCART, VGA |
? |
(specs) |
||
Sharp |
Aquos LC32LE700UN |
|||||||||
Xerox |
XL370b |
TFT |
17 |
1280 |
1024 |
5:4 |
3.5mm stereo, VGA |
|